Supported equipment
A driver list, not a promise.
Vendor independence is easy to claim. This is the list it rests on: every make and model the product drives today, grouped the way a station thinks about its line.
- Instrument models
- 45
- Manufacturers
- 23
- Instrument classes
- 6
- Measured parameters
- 12
Why this list exists
Your line is already equipped. That is the starting point.
Inspection stations do not re-equip because they change software. A line accumulates instruments over years — a brake bench from one decade, an opacimeter from another, a headlight tester from whoever had stock.
DVS combines the measuring tools on the line into a single controllable set, and can be changed quickly when equipment is swapped or requirements are updated. It is the reason a station can replace one manufacturer’s bench with another and keep every screen, procedure and report exactly as it was.
If an instrument you run is not below, that is a driver to write, not a reason the system will not work. Send us the model and we will tell you what it involves.
By instrument class
What the line measures, and with what.
Grouped by the test rather than the vendor — the way a station plans a position.
Gas analysers
7 modelsPetrol exhaust: CO, CO₂, HC, O₂, lambda
- MGT 5 MAHA
- BEA 050 / 150 Bosch
- BEA 460 MUX Bosch
- Infralyt CL SAXON Junkalor
- Multigas 488 Tecnotest
- HGA 400 Hermann
- Gas module Texa
Opacimeters
10 modelsDiesel exhaust opacity and engine speed
- MDO 2 MAHA
- DiSmoke 480 AVL DiTEST
- Opacilyt 1020 SAXON Junkalor
- Opacilyt 1030 SAXON Junkalor
- CAP 8520 CAPELEC
- CAP 8530 CAPELEC
- Opus 50-D Opus Prodox
- KTS 515 Bosch
- 408A Paltest
- Opacity module Texa
Combined analysers
5 modelsGas and opacity in one instrument
- DGA 1500 Sun Diagnostics
- RTM 430 Bosch
- BEA 050 ALL Bosch
- AUX 2000 AVL DiTEST
- EOBD 4220 CAPELEC
Brake testers
17 modelsRoller and plate benches, force per wheel
- IW2 / IW4 / IW7 MAHA
- IW FX KDS MAHA
- LON Bas MAHA
- LON IW MAHA
- MRS 433 Beissbarth
- MB 8100 Beissbarth
- BPS-Kompakt 6.0 Sherpa Autodiagnostik
- BT 4XX / 6XX Otto Nußbaum
- BT 500 Snap-on Equipment
- BM 4010 BM Autoteknik
- BSA FX Bosch
- BSA 330 Bosch
- Arena ATT
- Brake tester Hofmann
- WL 103 HANNI
- JeamBeam 2X JeamBeam
- CAN bench SAXON Junkalor
Headlight testers
5 modelsIntensity and alignment
- LITE 3 MAHA
- CAP 2500 (Bluetooth) CAPELEC
- CAP 2500 (Wi-Fi) CAPELEC
- Luminoscope PLA 25 L.E.T. Automotive
- Moon Technoliux
Cameras
1 modelVisual evidence tied to the measurement record
- M22 / Q24 Hemispheric MOBOTIX
By manufacturer
23 manufacturers, driven directly.
If you buy from one of these, the instrument is already known to the system.
Bosch
7- BEA 050 / 150
- BEA 460 MUX
- KTS 515
- RTM 430
- BEA 050 ALL
- BSA FX
- BSA 330
MAHA
7- MGT 5
- MDO 2
- IW2 / IW4 / IW7
- IW FX KDS
- LON Bas
- LON IW
- LITE 3
CAPELEC
5- CAP 8520
- CAP 8530
- EOBD 4220
- CAP 2500 (Bluetooth)
- CAP 2500 (Wi-Fi)
SAXON Junkalor
4- Infralyt CL
- Opacilyt 1020
- Opacilyt 1030
- CAN bench
AVL DiTEST
2- DiSmoke 480
- AUX 2000
Beissbarth
2- MRS 433
- MB 8100
Texa
2- Gas module
- Opacity module
ATT
1- Arena
BM Autoteknik
1- BM 4010
HANNI
1- WL 103
Hermann
1- HGA 400
Hofmann
1- Brake tester
JeamBeam
1- JeamBeam 2X
L.E.T. Automotive
1- Luminoscope PLA 25
MOBOTIX
1- M22 / Q24 Hemispheric
Opus Prodox
1- Opus 50-D
Otto Nußbaum
1- BT 4XX / 6XX
Paltest
1- 408A
Sherpa Autodiagnostik
1- BPS-Kompakt 6.0
Snap-on Equipment
1- BT 500
Sun Diagnostics
1- DGA 1500
Technoliux
1- Moon
Tecnotest
1- Multigas 488
Measured parameters
Everything the record has to carry.
Collected from the instruments, compared against the permitted limits, and stored with the vehicle — including the newer requirements that older station software never had to handle.
- Gas emission
- Exhaust opacity
- Particle number
- Engine speed
- Lights
- Brakes
- Wheel alignment
- Tyre pressure
- Speed
- Glass transparency
- Noise
- OBD & OBFCM
Is your instrument on the list?
Send the makes and models you run. We will confirm what is already supported and what the rest would take.